Refined Theories for Beam Bending: A Simplified Approach to Structural Analysis
Received: 5 January 2025 | Revised: 2 February 2025 | Accepted: 14 February 2025 | Online: 26 February 2025
Corresponding author: Aizhan Nurgoziyeva
Abstract
This study develops a refined beam theory that improves upon classical models by accurately capturing transverse shear deformation without requiring shear correction factors. The proposed approach maintains the simplicity of the Bernoulli-Euler theory while achieving higher precision in predicting transverse deflections, axial stresses, and shear stresses. A linearly elastic, homogeneous, and isotropic material with a uniform rectangular cross-section is assumed. The accuracy of the proposed theory is validated through comparisons with advanced shear deformation theories, showing that it provides reliable results with reduced computational complexity. Furthermore, the theory's applicability is demonstrated through case studies, showcasing its effectiveness in practical structural design and analysis Numerical comparisons indicate minimal percentage differences, with a maximum deviation of -0.37% for simply supported beams and -0.82% for fully clamped beams in transverse deflection predictions. The results align well with advanced shear deformation theories and two-dimensional elasticity solutions, confirming the model’s reliability. This theory enhances structural analysis, particularly for thick and shear-deformable beams, with potential extensions to anisotropic materials, dynamic loading, and complex boundary conditions in future research.
Keywords:
refined beam theory, structural analysis, transverse displacement, axial stress, transverse shear stress, thick beams, analytical solutionsDownloads
References
E. Carrera, G. Giunta, and M. Petrolo, Beam Structures: Classical and Advanced Theories, Chicester, West Sussex, UK: John Wiley & Sons, 2011.
S. Timoshenko and J. N. Goodier, Theory of Elasticity. New York, NY, USA: McGraw-Hill, 1970.
M. Levinson, "A new rectangular beam theory," Journal of Sound and Vibration, vol. 74, no. 1, pp. 81–87, 1981.
I. H. Shames and C. L. Dym, Energy and Finite Element Methods in Structural Mechanics. Daryaganj, New Delhi: New Age International, 1995.
L. W. Rehfield and P. L. N. Murthy, "Toward a new engineering theory of bending - Fundamentals," American Institute of Aeronautics and Astronautics Journal, vol. 20, no. 5, pp. 693–699, 1982.
A. V. K. Murty, "Toward a consistent beam theory," American Institute of Aeronautics and Astronautics Journal, vol. 22, no. 6, pp. 811–816, 1984.
M. H. Baluch, A. K. Azad, and M. A. Khidir, "Technical Theory of Beams with Normal Strain," Journal of Engineering Mechanics, vol. 110, no. 8, pp. 1233–1237, Aug. 1984.
A. Bhimaraddi and K. Chandrashekhara, "Observations on Higher‐Order Beam Theory," Journal of Aerospace Engineering, vol. 6, no. 4, pp. 408–413, Oct. 1993.
R. P. Shimpi, R. A. Shetty, and A. Guha, "A simple single variable shear deformation theory for a rectangular beam," Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 231, no. 24, pp. 4576–4591, Dec. 2017.
P. D. Simão, "Influence of shear deformations on the buckling of columns using the Generalized Beam Theory and energy principles," European Journal of Mechanics - A/Solids, vol. 61, pp. 216–234, Jan. 2017.
J. Kiendl, F. Auricchio, T. J. R. Hughes, and A. Reali, "Single-variable formulations and isogeometric discretizations for shear deformable beams," Computer Methods in Applied Mechanics and Engineering, vol. 284, pp. 988–1004, Feb. 2015.
K. Sad Saoud and P. Le Grognec, "An enriched 1D finite element for the buckling analysis of sandwich beam-columns," Computational Mechanics, vol. 57, no. 6, pp. 887–900, Jun. 2016.
Y.-M. Xia, S.-R. Li, and Z.-Q. Wan, "Bending Solutions of FGM Reddy–Bickford Beams in Terms of Those of the Homogenous Euler–Bernoulli Beams," Acta Mechanica Solida Sinica, vol. 32, no. 4, pp. 499–516, Aug. 2019.
S. Chen, R. Geng, and W. Li, "Vibration analysis of functionally graded beams using a higher-order shear deformable beam model with rational shear stress distribution," Composite Structures, vol. 277, Dec. 2021, Art. no. 114586.
K. Khorshidi, M. Rezaeisaray, and M. Karimi, "Analytical approach to energy harvesting of functionally graded higher-order beams with proof mass," Acta Mechanica, vol. 233, no. 10, pp. 4273–4293, Oct. 2022.
C. M. Wang, J. N. Reddy, and K. H. Lee, Shear Deformable Beams and Plates: Relationships with Classical Solutions, 1st ed. New York, NY, USA: Elsevier, 2000.
Y. M. Ghugal and R. Sharma, "A refined shear deformation theory for flexure of thick beams," Latin American Journal of Solids and Structures, vol. 8, pp. 183–195, Jun. 2011.
Y. M. Ghugal and A. G. Dahake, "Flexure of simply supported thick beams using refined shear deformation theory," International Journal of Civil Environmental, Structural, Construction and Architectural Engineering, vol. 7, no. 1, pp. 99–108, 2013.
A. G. Dahake and Y. M. Ghugal, "A Trigonometric Shear Deformation Theory for Flexure of Thick Beam," Procedia Engineering, vol. 51, pp. 1–7, Jan. 2013.
V. A. Jadhav and A. G. Dahake, "Bending analysis of deep beam using refined shear deformation theory," International Journal of Engineering Research, vol. 5, no. Special 3, pp. 526–31, 2016.
F. G. Canales and J. L. Mantari, "Boundary discontinuous Fourier analysis of thick beams with clamped and simply supported edges via CUF," Chinese Journal of Aeronautics, vol. 30, no. 5, pp. 1708–1718, Oct. 2017.
Y. M. Ghugal and R. P. Shimpi, "A Review of Refined Shear Deformation Theories for Isotropic and Anisotropic Laminated Beams," Journal of Reinforced Plastics and Composites, vol. 20, no. 3, pp. 255–272, Feb. 2001.
A. S. Sayyad and Y. M. Ghugal, "Bending, buckling and free vibration of laminated composite and sandwich beams: A critical review of literature," Composite Structures, vol. 171, pp. 486–504, Jul. 2017.
R. P. Shimpi, "Refined Plate Theory and Its Variants," American Institute of Aeronautics and Astronautics Journal, vol. 40, no. 1, pp. 137–146, 2002.
A. Mahi, E. A. Adda Bedia, and A. Tounsi, "A new hyperbolic shear deformation theory for bending and free vibration analysis of isotropic, functionally graded, sandwich and laminated composite plates," Applied Mathematical Modelling, vol. 39, no. 9, pp. 2489–2508, May 2015.
T. H. Daouadji, A. Hadj Henni, A. Tounsi, and A. B. El Abbes, "A New Hyperbolic Shear Deformation Theory for Bending Analysis of Functionally Graded Plates," Modelling and Simulation in Engineering, vol. 2012, no. 1, 2012, Art. no. 159806.
T. H. Daouadji, A. Tounsi, and E. A. A. Bedia, "A New Higher Order Shear Deformation Model for Static Behavior of Functionally Graded Plates," Advances in Applied Mathematics and Mechanics, vol. 5, no. 3, pp. 351–364, Jun. 2013.
R. P. Shimpi, P. J. Guruprasad, and K. S. Pakhare, "Single variable new first-order shear deformation theory for isotropic plates," Latin American Journal of Solids and Structures, vol. 15, Oct. 2018, Art. no. e124.
J. N. Reddy, "On locking-free shear deformable beam finite elements," Computer Methods in Applied Mechanics and Engineering, vol. 149, no. 1, pp. 113–132, Oct. 1997.
M. Ainsworth and K. Pinchedez, "The hp-MITC finite element method for the Reissner–Mindlin plate problem," Journal of Computational and Applied Mathematics, vol. 148, no. 2, pp. 429–462, Nov. 2002.
F. G. Canales and J. L. Mantari, "Buckling and free vibration of laminated beams with arbitrary boundary conditions using a refined HSDT," Composites Part B: Engineering, vol. 100, pp. 136–145, Sep. 2016.
A. S. Sayyad, Y. M. Ghugal, and N. S. Naik, "Bending analysis of laminated composite and sandwich beams according to refined trigonometric beam theory," Curved and Layered Structures, vol. 2, no. 1, pp. 279-289, Mar. 2015.
A. S. Sayyad, Y. M. Ghugal, and P. N. Shinde, "Stress analysis of laminated composite and soft core sandwich beams using a simple higher order shear deformation theory," Journal of the Serbian Society for Computational Mechanics, vol. 9, no. 1, pp. 15–35, 2015.
Y. Boutahar, N. Lebaal, and D. Bassir, "A Refined Theory for Bending Vibratory Analysis of Thick Functionally Graded Beams," Mathematics, vol. 9, no. 12, Jan. 2021, Art. no. 1422.
Y. M. Ghugal and A. G. Dahake, "Flexure of narrow rectangular deep beams with built-in ends," Journal of Structural Engineering, vol. 45, no. 6, pp. 497–511, 2019.
R. P. Shimpi, P. J. Guruprasad, and K. S. Pakhare, "Simple Two Variable Refined Theory for Shear Deformable Isotropic Rectangular Beams," Journal of Applied and Computational Mechanics, vol. 6, no. 3, pp. 394–415, Jul. 2020.
N. X. Tung, D. Van Tu, and N. N. Lam, "Finite Element Analysis of a Double Beam connected with Elastic Springs," Engineering, Technology & Applied Science Research, vol. 14, no. 1, pp. 12482–12487, 2024.
S. Akhazhanov, N. Omarbekova, A. Mergenbekova, G. Zhunussova, and D. Abdykeshova, "Analytical solution of beams on elastic foundation," GEOMATE Journal, vol. 19, no. 73, pp. 193–200, 2020.
S. B. Akhazhanov, N. I. Vatin, S. Akhmediyev, T. Akhazhanov, O. Khabidolda, and A. Nurgoziyeva, "Beam on a two-parameter elastic foundation: Simplified finite element model," Magazine of Civil Engineering, vol. 121, no. 5, pp. 12107–12107, 2023.
S. Akhazhanov, B. Bostanov, A. Kaliyev, T. Akhazhanov, and A. Mergenbekova, "Simplified method of calculating a beam on a two-parameter elastic foundation," GEOMATE Journal, vol. 25, no. 111, pp. 33–40, 2023.
B. Venkataraman and A. Patel, Structural Mechanics with Introductions to Elasticity and Plasticity, First Edition. New York, NY, USA: McGraw, 1970.
E. Carrera, A. Pagani, M. Petrolo, and E. Zappino, "Recent developments on refined theories for beams with applications," Mechanical Engineering Reviews, vol. 2, no. 2, 2015.
H. Gharehbaghi and A. Farrokhabadi, "Analytical, experimental, and numerical evaluation of mechanical properties of a new unit cell with hyperbolic shear deformable beam theory," Mechanics of Advanced Materials and Structures, vol. 31, no. 25, pp. 6419–6433, Nov. 2024.
Downloads
How to Cite
License
Copyright (c) 2025 Sungat Akhazhanov, Aizhan Nurgoziyeva, Aigerim Kassenova
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.
