Inter Coupling Modes Determination in Double Screen Frequency Selective Surfaces using the WCIP Method for Optimized Strip Length by Applying Real Genetic Algorithm

Authors

  • Asma Bounouara Electronic Department, Faculty of Technology, University of Batna 2, Algeria
  • Mohammed Titaouine Electronic Department, Faculty of Technology, University of Batna 2, Algeria
Volume: 15 | Issue: 3 | Pages: 23014-23019 | June 2025 | https://doi.org/10.48084/etasr.11002

Abstract

This paper presents a novel approach based on optimizing the strip length of a Frequency Selective Surface (FSS) structure using a Real Genetic Algorithm (RAG) in conjunction with the Wave Concept Iterative Method (WCIP). Mean Squared Error (MSE) is used as an objective function to calculate the error between the desired resonant frequency and the estimated one obtained through WCIP for each individual within the population. The approach was validated on two strip FSS structures, FSS1 and FSS2, showing a remarkable accuracy with relative errors of 0.0033% and 0.0029%, respectively. The results were obtained using MATLAB. After optimizing the length strips of both FSSs and cascading them, a strategy for identifying the coupling modes between the resulting double-screen FSS structure is introduced. The extracted coupling modes indicate that increasing the separation distance between the two FSSs reduces the number of modes participating in the coupling between FSS1 and FSS2. Two inter-FSS distance tests were used to validate the inter-FSS coupling modes determination strategy, and a good agreement was recorded between all mode WCIP results and the limited coupling mode WCIP results.

Keywords:

FSS, real genetic algorithm, coupling modes, full-wave WCIP method

Downloads

Download data is not yet available.

References

R. Saidi et al., "Characterization of Switchable Rectangular Ring FSS with Non Coupled Parallel Metallic Strips for Multi Band and Dual Polarized Applications Using WCIP Method," Journal of Microwaves, Optoelectronics and Electromagnetic Applications, vol. 17, no. 1, pp. 102–120, Mar. 2018. DOI: https://doi.org/10.1590/2179-10742018v17i11057

G. Manara, A. Monorchio, and R. Mittra, "Frequency selective surface design based on genetic algorithm," Electronics Letters, vol. 35, no. 17, pp. 1400–1401, Aug. 1999. DOI: https://doi.org/10.1049/el:19990991

S. Chakravarty, R. Mittra, and N. R. Williams, "On the application of the microgenetic algorithm to the design of broad-band microwave absorbers comprising frequency-selective surfaces embedded in multilayered dielectric media," IEEE Transactions on Microwave Theory and Techniques, vol. 49, no. 6, pp. 1050–1059, Jun. 2001. DOI: https://doi.org/10.1109/22.925490

A. Bounouara, M. Titaouine, K. Bencherif, and R. Saidi, "Optimization of Strips Lengths in Parallel Non Coupled Metallic Strips Frequency Selective Surfaces (FSS) Using Genetic Algorithm (GA) and WCIP Method," in Proceedings of the 5th International Conference on Electrical Engineering and Control Applications–Volume 2, 2024, pp. 317–325. DOI: https://doi.org/10.1007/978-981-97-4776-4_32

H. O. Aljorany and A. M. R. Mahjoob, "Establishing a Budget for Optimal Response Strategies for Risks Categorized into Distinct Groups by using a Mathematical Model and Genetic Algorithm," Engineering, Technology & Applied Science Research, vol. 14, no. 3, pp. 14747–14753, Jun. 2024. DOI: https://doi.org/10.48084/etasr.7526

D. E. Goldberg, Genetic Algorithms in Search, Optimization and Machine Learning, 1st ed. Boston, MA, USA: Addison-Wesley Professional, 1989.

W. Afzal, M. Z. Baig, A. Ebrahimi, M. R. Robel, M. T. A. Rana, and W. Rowe, "Frequency Selective Surfaces: Design, Analysis, and Applications," Telecom, vol. 5, no. 4, pp. 1102–1128, Dec. 2024. DOI: https://doi.org/10.3390/telecom5040056

A. Qing, C. K. Lee, and L. Jen, "Microwave Imaging of Parallel Perfectly Conducting Cylinders Using Real-Coded Genetic Algorithm," Journal of Electromagnetic Waves and Applications, vol. 13, no. 8, pp. 1121–1143, Jan. 1999. DOI: https://doi.org/10.1163/156939399X01276

A. Qing, C. K. Lee, and L. Jen, "Electromagnetic inverse scattering of two-dimensional perfectly conducting objects by real-coded genetic algorithm," IEEE Transactions on Geoscience and Remote Sensing, vol. 39, no. 3, pp. 665–676, Mar. 2001. DOI: https://doi.org/10.1109/36.911123

X. F. Luo, A. Qin, and C. K. Lee, "The design of frequency selective surfaces (FSS) using real-coded genetic algorithm (RGA)," in Fourth International Conference on Information, Communications and Signal Processing, 2003 and the Fourth Pacific Rim Conference on Multimedia. Proceedings of the 2003 Joint, Singapore, 2003, vol. 1, pp. 391–395. DOI: https://doi.org/10.1109/ICICS.2003.1292481

Z. Michalewicz, Genetic Algorithms + Data Structures = Evolution Programs. Springer Science & Business Media, 2013.

M. Al-Joumayly and N. Behdad, "A New Technique for Design of Low-Profile, Second-Order, Bandpass Frequency Selective Surfaces," IEEE Transactions on Antennas and Propagation, vol. 57, no. 2, pp. 452–459, Oct. 2009. DOI: https://doi.org/10.1109/TAP.2008.2011382

M. Yan et al., "A Miniaturized Dual-Band FSS With Second-Order Response and Large Band Separation," IEEE Antennas and Wireless Propagation Letters, vol. 14, pp. 1602–1605, 2015. DOI: https://doi.org/10.1109/LAWP.2015.2413942

S. Akatimagool, "Electromagnetic Software Tools for Microwave Multi-layer Integrated Circuits and Components," vol. 13, no. 2, 2003.

K. Bencherif et al., "Multiband FSS Analysis and Synthesis Based on Parallel Non Coupled Metallic Strips Using WCIP Method," Journal of Microwaves, Optoelectronics and Electromagnetic Applications, vol. 17, no. 4, pp. 433–456, Oct. 2018. DOI: https://doi.org/10.1590/2179-10742018v17i41264

S. Aroussi, L. Latrach, N. Sboui, A. Gharsallah, A. Gharbi, and H. Baudrand, "Efficient Analysis of Complex FSS Structure Using the WCIP Method," Journal of Electromagnetic Analysis and Applications, vol. 3, no. 11, pp. 447–451, Nov. 2011. DOI: https://doi.org/10.4236/jemaa.2011.311071

M. Titaouine, A. G. Neto, H. Baudrand, and F. Djahli, "Analysis of shorted ring slots frequency selective surfaces using WCIP method," Journal of Microwaves, Optoelectronics and Electromagnetic Applications (JMOe), vol. 7, no. 2, pp. 65–82, 2008.

M. Titaouine, N. Raveu, A. Gomes Neto, and H. Baudrand, "Dual-band and enhanced band FSS characterization using WCIP method," Microwave and Optical Technology Letters, vol. 52, no. 4, pp. 836–839, 2010. DOI: https://doi.org/10.1002/mop.25073

T. O. Hodson, T. M. Over, and S. S. Foks, "Mean Squared Error, Deconstructed," Journal of Advances in Modeling Earth Systems, vol. 13, no. 12, 2021, Art. no. e2021MS002681. DOI: https://doi.org/10.1029/2021MS002681

Downloads

How to Cite

[1]
A. Bounouara and M. Titaouine, “Inter Coupling Modes Determination in Double Screen Frequency Selective Surfaces using the WCIP Method for Optimized Strip Length by Applying Real Genetic Algorithm”, Eng. Technol. Appl. Sci. Res., vol. 15, no. 3, pp. 23014–23019, Jun. 2025.

Metrics

Abstract Views: 109
PDF Downloads: 210

Metrics Information