Comparative SEM–EDS Characterization of Marine Sand from Multiple Coastal Regions of Central Indonesia for Engineering Applications

Adnan; Miswar Tumpu; Muhammad Jabir Muhammadiyah; Andung Yunianta; Hoong-Pin Lee

doi:10.48084/etasr.17153

Authors

Adnan Department of Civil Engineering, Universitas Muhammadiyah Pare-Pare, Indonesia
Miswar Tumpu Disaster Management Study Program, The Graduate School, Hasanuddin University, Indonesia
Muhammad Jabir Muhammadiyah Department of Civil Engineering, Universitas Muhammadiyah Pare-Pare, Indonesia
Andung Yunianta Department of Civil Engineering, Yapis University, Jayapura, Indonesia
Hoong-Pin Lee Department of Civil Engineering, Faculty of Engineering and Quantity Surveying, INTI International University, Malaysia

Volume: 16 | Issue: 2 | Pages: 34525-34533 | April 2026 | https://doi.org/10.48084/etasr.17153

Received: 24 December 2025 | Revised: 14 January 2026 and 23 January 2026 | Accepted: 2 February 2026 | Online: 4 April 2026

Corresponding author: Adnan

Abstract

Marine sand is an alternative construction material due to the growing demand for natural aggregates and the depletion of terrestrial resources. Its use also aligns with the Sustainable Development Goals (SDGs), particularly SDG 9, SDG 11, and SDG 12. This study examines the mineralogical and elemental characteristics of marine sand collected from several coastal regions in central Indonesia, including South Sulawesi (Balusu Barru, Bojo Barru, Pangkep, Pare-Pare, Pinrang, and Selayar) and East Kalimantan (Muara Badak), using Scanning Electron Microscopy coupled with Energy Dispersive Spectroscopy (SEM–EDS). The results indicate regional variations in particle morphology, surface texture, and elemental composition, reflecting differences in geological setting and coastal sediment processes. Several samples exhibit silica-dominated characteristics, while others show higher contents of calcium (Ca)-, magnesium (Mg)-, and iron (Fe)-bearing phases, suggesting varying levels of suitability for engineering applications. SEM–EDS analysis reveals silicon (Si) contents ranging from approximately 2.9 to 12.8 wt.% and Ca contents between 0.0 and 18.5 wt.%. The novelty of this study lies in its comparative regional assessment, demonstrating that marine sand should not be treated as a homogeneous material across different coastal environments. From an engineering perspective, the findings provide valuable insights for material selection in concrete, mortar, and geotechnical applications, particularly for coastal infrastructure development, while emphasizing the importance of site-specific characterization to support sustainable material utilization and environmentally responsible construction practices.

Keywords:

marine sand, SEM–EDS analysis, mineralogical variability, regional differentiation, sustainable building, engineering applications, coastal resources

Downloads

Download data is not yet available.

References

K. T. Holland and P. A. Elmore, "A Review of Heterogeneous Sediments in Coastal Environments," Earth-Science Reviews, vol. 89, no. 3–4, pp. 116–134, Aug. 2008. DOI: https://doi.org/10.1016/j.earscirev.2008.03.003

Y. Zhou, Y. Zhan, M. Zhu, S. Wang, J. Liu, and N. Ning, "A Review of the Effects of Raw Material Compositions and Steam Curing Regimes on the Performance and Microstructure of Precast Concrete," Materials, vol. 15, no. 8, Apr. 2022, Art. no. 2859. DOI: https://doi.org/10.3390/ma15082859

O. Mishra and S. P. Singh, "An Overview of Microstructural and Material Properties of Ultra-High-Performance Concrete," Journal of Sustainable Cement-Based Materials, vol. 8, no. 2, pp. 97–143, Mar. 2019. DOI: https://doi.org/10.1080/21650373.2018.1564398

S. K. Onsongo, J. Olukuru, O. M. Munyao, and O. Mwabonje, "The Role of Agricultural Ashes (Rice Husk Ash, Coffee Husk Ash, Sugarcane Bagasse Ash, Palm Oil Fuel Ash) in Cement Production for Sustainable Development in Africa," Discover Sustainability, vol. 6, no. 1, Jan. 2025, Art. no. 62. DOI: https://doi.org/10.1007/s43621-025-00841-6

D. S. Shastri et al., "Characterization of Aggregate Concrete with Eco-Friendly Silicon Additives: A Green Material for Sustainable Infrastructure," Composite Interfaces, pp. 1–12, Dec. 2025. DOI: https://doi.org/10.1080/09276440.2025.2597690

A. Ali, N. Zhang, and R. M. Santos, "Mineral Characterization Using Scanning Electron Microscopy (SEM): A Review of the Fundamentals, Advancements, and Research Directions," Applied Sciences, vol. 13, no. 23, Nov. 2023, Art. no. 12600. DOI: https://doi.org/10.3390/app132312600

K. Moolchandani, "Advancements in Pumice-Based Concrete: A Comprehensive Review," Next Materials, vol. 8, Jul. 2025, Art. no. 100646. DOI: https://doi.org/10.1016/j.nxmate.2025.100646

T. Oey et al., "Calcium Nitrate: A Chemical Admixture to Inhibit Aggregate Dissolution and Mitigate Expansion Caused by Alkali-Silica Reaction," Cement and Concrete Composites, vol. 110, Jul. 2020, Art. no. 103592. DOI: https://doi.org/10.1016/j.cemconcomp.2020.103592

B. S. Thomas, J. Yang, K. H. Mo, J. A. Abdalla, R. A. Hawileh, and E. Ariyachandra, "Biomass Ashes from Agricultural Wastes as Supplementary Cementitious Materials or Aggregate Replacement in Cement/Geopolymer Concrete: A Comprehensive Review," Journal of Building Engineering, vol. 40, Aug. 2021, Art. no. 102332. DOI: https://doi.org/10.1016/j.jobe.2021.102332

J. Duchesne, "Alternative Supplementary Cementitious Materials for Sustainable Concrete Structures: A Review on Characterization and Properties," Waste and Biomass Valorization, vol. 12, no. 3, pp. 1219–1236, Mar. 2021. DOI: https://doi.org/10.1007/s12649-020-01068-4

A. A. Jhatial, I. Nováková, and E. Gjerløw, "A Review on Emerging Cementitious Materials, Reactivity Evaluation and Treatment Methods," Buildings, vol. 13, no. 2, Feb. 2023, Art. no. 526. DOI: https://doi.org/10.3390/buildings13020526

C. Kandou, M. Tumpu, D. R. G. Kabo, and H. Tumengkol, "Development of High-Performance Concrete with Advanced Materials for Sustainable Building Applications," Engineering, Technology & Applied Science Research, vol. 15, no. 2, pp. 21482–21487, Apr. 2025. DOI: https://doi.org/10.48084/etasr.10299

M. Y. Satria, M. F. Samawi, and M. Tumpu, "Semi Quantitative Analyses of Eco-Cement Made from Landfill Waste Burning Ash and Portland Composite Cement," International Journal of Environmental Impacts, vol. 8, no. 2, Apr. 2025. DOI: https://doi.org/10.18280/ijei.080206

I. Suhendro et al., "Identifying the Vulnerable Landforms Toward Climate Change-Related Hazards on Small Islands Using Geological-geomorphological and Social Approaches (Kei Kecil-Tual Carbonate Islands, Southeast Maluku, Indonesia)," Carbonates and Evaporites, vol. 40, no. 2, Jun. 2025, Art. no. 68. DOI: https://doi.org/10.1007/s13146-025-01101-4

M. G. Yalcin, D. G. Nyamsari, O. Ozer Atakoglu, and F. Yalcin, "Chemical and Statistical Characterization of Beach Sand Sediments: Implication for Natural and Anthropogenic Origin and Paleo-Environment," International Journal of Environmental Science and Technology, vol. 19, no. 3, pp. 1335–1356, Mar. 2022. DOI: https://doi.org/10.1007/s13762-021-03280-8

U. Ulusoy, "A Review of Particle Shape Effects on Material Properties for Various Engineering Applications: From Macro to Nanoscale," Minerals, vol. 13, no. 1, Jan. 2023, Art. no. 91. DOI: https://doi.org/10.3390/min13010091

G. Masselink and S. Van Heteren, "Response of Wave-Dominated and Mixed-Energy Barriers to Storms," Marine Geology, vol. 352, pp. 321–347, Jun. 2014. DOI: https://doi.org/10.1016/j.margeo.2013.11.004

K. Saha and S. Sinha, "Grain Size Analysis and Characterization of Sedimentary Process in Tidal Flat of Chandipur Region, East Coast of India," Marine Geodesy, vol. 44, no. 5, pp. 485–503, Sep. 2021. DOI: https://doi.org/10.1080/01490419.2021.1922554

H. M. Zakir Hossain, J. S. Armstrong-Altrin, and M. A. Ramos-Vázquez, "Microtextures on Quartz Grain Surfaces in the Bay of Bengal Shoreline Sediments, Bangladesh: Implications for Sediment Transport Process and Depositional Environment," CATENA, vol. 237, Mar. 2024, Art. no. 107770. DOI: https://doi.org/10.1016/j.catena.2023.107770

L. Hu, L. Li, T. Chen, and X. Gao, "Understanding the Role of Paste Composition and Aggregate Parameters in Shaping Pore Connectivity and Strength in Pervious Concrete," Construction and Building Materials, vol. 493, Sep. 2025, Art. no. 143195. DOI: https://doi.org/10.1016/j.conbuildmat.2025.143195

J. Xiao, M. Bai, Y. Wu, Z. Duan, and J. Qin, "Interlayer Bonding Strength and Pore Characteristics of 3D Printed Engineered Cementitious Composites (ECC)," Journal of Building Engineering, vol. 84, May 2024, Art. no. 108559. DOI: https://doi.org/10.1016/j.jobe.2024.108559

J. Zhou, Y. Dong, T. Qiu, J. Lv, P. Guo, and X. Liu, "The Microstructure and Modification of the Interfacial Transition Zone in Lightweight Aggregate Concrete: A Review," Buildings, vol. 15, no. 15, Aug. 2025, Art. no. 2784. DOI: https://doi.org/10.3390/buildings15152784

G. Xu et al., "Influence of Size and Surface Condition of Distributing-Filling Coarse Aggregate on the Properties of Aggregate-Interlocking Concrete," Construction and Building Materials, vol. 261, Nov. 2020, Art. no. 120002. DOI: https://doi.org/10.1016/j.conbuildmat.2020.120002

G. H. El-Habaak, "Banded Iron Formation in the Egyptian Nubian Shield," in The Geology of the Egyptian Nubian Shield, Z. Hamimi, S. Arai, A.-R. Fowler, and M. Z. El-Bialy, Eds. Cham: Springer International Publishing, 2021, pp. 425–486. DOI: https://doi.org/10.1007/978-3-030-49771-2_17

M. Okrusch and H. E. Frimmel, "Sediments and Sedimentary Rocks," in Mineralogy, Berlin, Heidelberg: Springer Berlin Heidelberg, 2020, pp. 417–452. DOI: https://doi.org/10.1007/978-3-662-57316-7_25

D. Dachev, M. Kazilas, G. Alfano, and S. Omairey, "Towards Reliable Adhesive Bonding: A Comprehensive Review of Mechanisms, Defects, and Design Considerations," Materials, vol. 18, no. 12, Jun. 2025, Art. no. 2724. DOI: https://doi.org/10.3390/ma18122724

H. Ejaz et al., "Strength Improvement/Optimization Methods in Adhesively Bonded Joints: A Comprehensive Review of Past and Present Techniques," Mechanics of Advanced Materials and Structures, vol. 32, no. 17, pp. 4078–4106, Sep. 2025. DOI: https://doi.org/10.1080/15376494.2024.2400610

R. A. Pethrick, "Design and Ageing of Adhesives for Structural Adhesive Bonding – A Review," Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 229, no. 5, pp. 349–379, Oct. 2015. DOI: https://doi.org/10.1177/1464420714522981

H. G. Şahin and A. Mardani, "Mechanical Properties, Durability Performance and Interlayer Adhesion of 3DPC Mixtures: A State‐of‐the‐art Review," Structural Concrete, vol. 24, no. 4, pp. 5481–5505, Aug. 2023. DOI: https://doi.org/10.1002/suco.202200473

Y. He, X. Zhang, R. D. Hooton, and X. Zhang, "Effects of Interface Roughness and Interface Adhesion on New-to-Old Concrete Bonding," Construction and Building Materials, vol. 151, pp. 582–590, Oct. 2017. DOI: https://doi.org/10.1016/j.conbuildmat.2017.05.049

S. Wang et al., "Leaching-Induced Deterioration of Shear Bonding Strength and Micro-Vickers Hardness of the ITZ Modified by Micro-SiO2 and Nano-SiO2," Journal of Building Engineering, vol. 92, Sep. 2024, Art. no. 109760. DOI: https://doi.org/10.1016/j.jobe.2024.109760

A. Zhang, W. Yang, Y. Ge, Y. Du, and P. Liu, "Effects of Nano-SiO2 and nano-Al2O3 on Mechanical and Durability Properties of Cement-Based Materials: A Comparative Study," Journal of Building Engineering, vol. 34, Feb. 2021, Art. no. 101936. DOI: https://doi.org/10.1016/j.jobe.2020.101936

M. Balapour, A. Joshaghani, and F. Althoey, "Nano-SiO2 Contribution to Mechanical, Durability, Fresh and Microstructural Characteristics of Concrete: A Review," Construction and Building Materials, vol. 181, pp. 27–41, Aug. 2018. DOI: https://doi.org/10.1016/j.conbuildmat.2018.05.266

P. Zhang, J. Wan, K. Wang, and Q. Li, "Influence of Nano-SiO2 on Properties of Fresh and Hardened High Performance Concrete: A State-of-the-Art Review," Construction and Building Materials, vol. 148, pp. 648–658, Sep. 2017. DOI: https://doi.org/10.1016/j.conbuildmat.2017.05.059

M. O. Osta, A. Azeem, S. Rashid, M. Harun, and A. Hanif, "Marine Resilience: Understanding the Durability and Effects on Concrete Structures—A Comprehensive Review," Arabian Journal for Science and Engineering, Oct. 2025. DOI: https://doi.org/10.1007/s13369-025-10697-7

P. Lampropoulou et al., "The Effect of Chemical Composition of Ultramafic and Mafic Aggregates on Their Physicomechanical Properties as well as on the Produced Concrete Strength," Minerals, vol. 10, no. 5, Apr. 2020, Art. no. 406. DOI: https://doi.org/10.3390/min10050406

H. H. Nguyen, A. Carter, L. V. Hoang, and S. T. Vu, "Provenance, Routing and Weathering History of Heavy Minerals from Coastal Placer Deposits of Southern Vietnam," Sedimentary Geology, vol. 373, pp. 228–238, Oct. 2018. DOI: https://doi.org/10.1016/j.sedgeo.2018.06.008