Behavior of Glass Fiber Reinforced Polymer Concrete Panels
Received: 25 September 2024 | Revised: 20 November 2024 | Accepted: 28 November 2024 | Online: 3 April 2025
Corresponding author: Ali Hussein Ali Al-Ahmed
Abstract
Glass Fiber Reinforced Polymer (GFRP) bars have gained popularity as a corrosion-resistant alternative to traditional steel reinforcement in Reinforced Concrete (RC) elements. This study investigates the flexural behavior of PRC panels reinforced with GFRP bars. The study variables included the GFRP reinforcement ratio and the number of embedded steel section distributions. Six concrete panels were fabricated, each measuring 2500 mm in length, with a rectangular cross-section of 750 mm in width and 150 mm in thickness. All panels were reinforced with GFRP bars and divided into two groups based on the reinforcement ratios of 0.532% and 0.266%. For each group, one panel served as the control specimen, while the remaining two were internally strengthened with embedded steel box sections, one with 2 steel sections and the other with 4 sections. The parametric study highlighted the effects of the reinforcement ratio and the inclusion of internal I-section steel shapes on the flexural performance of the panels. Compared to non-strengthened control slabs, the addition of steel elements significantly improved the structural performance, as evidenced by reductions in deflection, strains, and crack widths, as well as an increase in the ultimate load capacity and flexural stiffness at the ultimate loading stage. These findings underscore the effectiveness of combining GFRP reinforcement with embedded steel shapes to enhance the structural performance of PRC panel slabs.
Keywords:
GFRP, steel box section, precast panelDownloads
References
S. Wang, J. Tang, Y. Zou, and Q. Zhou, "Research on production process optimization of precast concrete component factory based on value stream mapping," Engineering, Construction and Architectural Management, vol. 27, no. 4, pp. 850–871, Nov. 2019.
J. Bai, Advanced Fibre-Reinforced Polymer (FRP) Composites for Structural Applications, 2nd ed. Sawston, Cambridge, UK: Woodhead Publishing, 2022.
J. Qureshi, "A Review of Fiber Reinforced Polymer Structures," Fibers, vol. 10, no. 3, Mar. 2022, Art. no. 27.
M. Abdulkhaliq and A. H. Al-Ahmed, "The Flexural Behavior of One-Way Concrete Bubbled Slabs Reinforced by GFRP-Bars with Embedded Steel I-Sections," Engineering, Technology & Applied Science Research, vol. 14, no. 4, pp. 15860–15870, Aug. 2024.
S. Waghmare, S. Shelare, K. Aglawe, and P. Khope, "A mini review on fibre reinforced polymer composites,", Materials Today: Proceedings, Jan. 2022, vol. 54, pp. 682–689.
S. Reichenbach, P. Preinstorfer, M. Hammerl, and B. Kromoser, "A review on embedded fibre-reinforced polymer reinforcement in structural concrete in Europe," Construction and Building Materials, vol. 307, Nov. 2021, Art. no. 124946.
M. Abdulkhaliq and A. H. Al-Ahmed, "Behavior of GFRP Reinforced-Concrete Bubbled One-Way Slabs by Encased Composite Steel I-Sections," Engineering, Technology & Applied Science Research, vol. 14, no. 5, pp. 16701–16712, Oct. 2024.
A. Jalil and A. H. Al-Zuhairi, "Behavior of post-tensioned concrete girders subject to partially strand damage and strengthened by NSM-CFRP composites," Civil Engineering Journal, vol. 8, no. 7, pp. 1507–1521, 2022.
M. R. Khalaf, A. H. A. Al-Ahmed, A. A. Allawi, and A. El-Zohairy, "Strengthening of Continuous Reinforced Concrete Deep Beams with Large Openings Using CFRP Strips," Materials, vol. 14, no. 11, Jan. 2021, Art. no. 3119.
A. Q. Mohammad and R. M. Abbas, "Structural Behavior of Prestressed RC Dapped Beam with Openings Strengthened Using CFRP Sheets," in International Conference on Geotechnical Engineering and Energetic, Iraq, 2023, Art. no. 02004.
S. Sirimontree, S. Keawsawasvong, and C. Thongchom, "Flexural Behavior of Concrete Beam Reinforced with GFRP Bars Compared to Concrete Beam Reinforced with Conventional Steel Reinforcements," Journal of Applied Science and Engineering, vol. 24, no. 6, pp. 883–890.
S. A. Jabbar and S. B. H. Farid, "Replacement of steel rebars by GFRP rebars in the concrete structures," Karbala International Journal of Modern Science, vol. 4, no. 2, pp. 216–227, Jun. 2018.
S. A. Sheikh and Z. Kharal, "Replacement of steel with GFRP for sustainable reinforced concrete," Construction and Building Materials, vol. 160, pp. 767–774, Jan. 2018.
P. Qiao, Q. Liu, Z. Lu, and Z. Wang, "Flexural behaviour of GFRP-encased concrete panels," Magazine of Concrete Research, vol. 70, no. 24, pp. 1265–1279, Dec. 2018.
T. Liu, P. Feng, X. Lu, J.-Q. Yang, and Y. Wu, "Flexural behavior of novel hybrid multicell GFRP-concrete beam," Composite Structures, vol. 250, Oct. 2020, Art. no. 112606.
J. Di, L. Cao, and J. Han, "Experimental Study on the Shear Behavior of GFRP–Concrete Composite Beam Connections," Materials, vol. 13, no. 5, Jan. 2020, Art. no. 1067.
M. M. Hason, A. H. Al-Zuhairi, A. N. Hanoon, A. A. Abdulhameed, A. W. Al Zand, and I. S. Abbood, "Peak Ground Acceleration Models Predictions Utilizing Two Metaheuristic Optimization Techniques," Latin American Journal of Solids and Structures, vol. 19, Jun. 2022, Art. no. e447.
P. D. Gkournelos, T. C. Triantafillou, and D. A. Bournas, "Seismic upgrading of existing reinforced concrete buildings: A state-of-the-art review," Engineering Structures, vol. 240, Aug. 2021, Art. no. 112273.
G. de Matteis and M. Ferraioli, "Metal Shear Panels for Seismic Upgrading of RC Buildings: A Case Study," Key Engineering Materials, vol. 763, pp. 1058–1066, 2018.
P. Szewczyk, "Experimental and Numerical Study of Steel–Concrete Composite Beams Strengthened under Load," Materials, vol. 17, no. 18, 2024, Art. no. 4510.
P. Matchan, S. Sirimontree, and B. Witchayagkoon, "Simulation of Flexural Behavior of Damaged Prestressed Concrete Beam by Finite Element Method," International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies, vol. 6, no. 5, pp. 225–234, 2015.
F. H. Ibrahim and A. H. Ali Al-Ahmed, "Finite Element Analysis of Cracked One-Way Bubbled Slabs Strengthened By External Prestressed Strands," Journal of Engineering, vol. 27, no. 1, pp. 46–66, Jan. 2021.
M. Abramowicz, S. Berczyński, and T. Wróblewski, "Modelling and parameter identification of steel–concrete composite beams in 3D rigid finite element method," Archives of Civil and Mechanical Engineering, vol. 20, no. 4, Sep. 2020, Art. no. 103.
Z. K. Al-Mamory and A. H. A. Al-Ahmed, "Behavior of steel fiber reinforced concrete beams with CFRP wrapped lap splice bars," Structures, vol. 44, pp. 1995–2011, Oct. 2022.
Y.-C. Ou, M.-S. Tsai, K.-Y. Liu, and K.-C. Chang, "Compressive Behavior of Steel-Fiber-Reinforced Concrete with a High Reinforcing Index," Journal of Materials in Civil Engineering, vol. 24, no. 2, pp. 207–215, Feb. 2012.
A. Mathern and J. Yang, "A Practical Finite Element Modeling Strategy to Capture Cracking and Crushing Behavior of Reinforced Concrete Structures," Materials, vol. 14, no. 3, Jan. 2021, Art. no. 506.
S. A. Mohammed and A. I. Said, "Analysis of concrete beams reinforced by GFRP bars with varying parameters," Journal of the Mechanical Behavior of Materials, vol. 31, no. 1, pp. 767–774, Jan. 2022.
A. Raza, Q. uz Z. Khan, and A. Ahmad, "Numerical Investigation of Load-Carrying Capacity of GFRP-Reinforced Rectangular Concrete Members Using CDP Model in ABAQUS," Advances in Civil Engineering, vol. 2019, no. 1, 2019, Art. no. 1745341.
P. Zhang et al., "Influence factors analysis of the interfacial bond behavior between GFRP plates, concrete," Structures, vol. 26, pp. 79–91, Aug. 2020.
A. Hussein Ali Al-Ahmed, A. Al-Rumaithi, A. A. Allawi, and A. El-Zohairy, "Mesoscale analysis of Fiber-Reinforced concrete beams," Engineering Structures, vol. 266, Sep. 2022, Art. no. 114575.
Downloads
How to Cite
License
Copyright (c) 2025 Ali Hussein Ali Al-Ahmed, Hussain Fadhil Hussain, Alaa Hussein Al-Zuhairi, Zainab Kareem Al-Mamory
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.
