Dimensional Stability and Moisture Content of White Teak Wood Treated with Nano-SiO2 and Furfuryl Alcohol
Received: 8 January 2025 | Revised: 30 January 2025 | Accepted: 9 February 2025 | Online:
Corresponding author: Miswar Tumpu
Abstract
The objective of this study is to assess the impact of nanoparticle impregnation on the moisture content and dimensional stability of white teak wood derived from Southeast Sulawesi, Indonesia. The impregnation method was employed to process white teak wood samples, with varying concentrations of Furfuryl Alcohol (FA) and nano-SiO2. The wood samples underwent examinations to quantify the moisture content, dimensional changes, and mechanical properties after treatment, including Weight Percent Gain (WPG), Bulking Effect (BE), Anti-Swelling Efficiency (ASE), and Water Uptake (WU). The results indicated that the dimensional stability of white teak wood was considerably enhanced with the impregnation process, as evidenced by a decrease in swelling, compared to the untreated wood. Additionally, the moisture content of impregnated wood decreased significantly, suggesting improved moisture resistance. These findings demonstrate that the application of nano-SiO2 and FA as impregnation materials offers a viable solution for enhancing the quality and durability of white teak, potentially expanding its applications in the construction sector.
Keywords:
dimensional stability, moisture content, impregnancies, nano-SiO₂, furfuryl alcoholDownloads
References
L. Emmerich and H. Militz, "Study on the impregnation quality of rubberwood (Hevea brasiliensis Müll. Arg.) and English oak (Quercus robur L.) sawn veneers after treatment with 1,3-dimethylol-4,5- dihydroxyethyleneurea (DMDHEU)," Holzforschung, vol. 74, no. 4, pp. 362–371, Apr. 2020.
A. M. C. Yona, J. Žigon, P. Matjaž, and M. Petrič, "Potentials of silicate-based formulations for wood protection and improvement of mechanical properties: A review," Wood Science and Technology, vol. 55, no. 4, pp. 887–918, Jul. 2021.
M. Weng, Y. Zhu, W. Mao, J. Zhou, and W. Xu, "Nano-Silica/Urea-Formaldehyde Resin-Modified Fast-Growing Lumber Performance Study," Forests, vol. 14, no. 7, Jul. 2023, Art. no 1440.
I. Rahayu, F. C. Dirna, A. Maddu, W. Darmawan, D. Nandika, and E. Prihatini, "Dimensional Stability of Treated Sengon Wood by Nano-Silica of Betung Bamboo Leaves," Forests, vol. 12, no. 11, Nov. 2021, Art. no. 1581.
H. R. Taghiyari, M. Tajvidi, R. Taghiyari, G. I. Mantanis, A. Esmailpour, and R. Hosseinpourpia, "Chapter 19 - Nanotechnology for wood quality improvement and protection," in Nanomaterials for Agriculture and Forestry Applications, A. Husen and M. Jawaid, Eds. Amsterdam, Netherlands: Elsevier, 2020, pp. 469–489.
S. Augustina, W. Dwianto, I. Wahyudi, W. Syafii, P. Gérardin, and S. D. Marbun, "Wood Impregnation in Relation to Its Mechanisms and Properties Enhancement.," BioResources, vol. 18, no. 2, 2023, Art. no. 4332.
I. Rahayu, E. Prihatini, A. Maddu, M. Kurniati, and W. Darmawan, "Density and dimensional stability of a wood-polymer nano-composite from fast-growing wood," BioResources, vol. 17, no. 1, 2022, Art. no. 750.
R. Bansal, H. C. Barshilia, and K. K. Pandey, "Nanotechnology in wood science: Innovations and applications," International Journal of Biological Macromolecules, vol. 262, Mar. 2024, Art. no. 130025.
T. Kanokwijitsilp, P. Traiperm, T. Osotchan, and T. Srikhirin, "Development of abrasion resistance SiO2 nanocomposite coating for teak wood," Progress in Organic Coatings, vol. 93, pp. 118–126, Apr. 2016.
S. R. Shukla and S. K. Sharma, "Improving physico-mechanical properties, thermal stability and decay resistance of fast grown Melia dubia wood by nanoclay fortified phenolic resin impregnation," Journal of the Indian Academy of Wood Science, vol. 19, no. 1, pp. 1–15, Jun. 2022.
L. Jasmani, R. Rusli, T. Khadiran, R. Jalil, and S. Adnan, "Application of Nanotechnology in Wood-Based Products Industry: A Review," Nanoscale Research Letters, vol. 15, no. 1, Nov. 2020, Art. no. 207.
Y. Dong et al., "Improvement of water resistance, dimensional stability, and mechanical properties of poplar wood by rosin impregnation," European Journal of Wood and Wood Products, vol. 74, no. 2, pp. 177–184, Mar. 2016.
E. E. Thybring, M. Fredriksson, S. L. Zelinka, and S. V. Glass, "Water in Wood: A Review of Current Understanding and Knowledge Gaps," Forests, vol. 13, no. 12, Dec. 2022, Art. no. 2051.
C. Croitoru, S. Patachia, and A. Lunguleasa, "New Method of Wood Impregnation with Inorganic Compounds Using Ethyl Methylimidazolium Chloride as Carrier," Journal of Wood Chemistry and Technology, vol. 35, no. 2, pp. 113–128, Mar. 2015.
S. Augustina, I. Wahyudi, I. W. Darmawan, J. Malik, E. Basri, and Y. Kojima, "Specific Gravity and Dimensional Stability of Boron-Densified Wood on Three Lesser-Used Species from Indonesia," Journal of the Korean Wood Science and Technology, vol. 48, no. 4, pp. 458–471, 2020.
S. V. Glass and S. L. Zelinka, "Chapter 4: Mosture Detection and Physical Properties of Wood," United States Department of Agriculture Forest Service, Madison, WI, USA, General Technical Report FPL–GTR–282, Mar. 2021.
J. Fernandes, A. W. Kjellow, and O. Henriksen, "Modeling and optimization of the supercritical wood impregnation process—Focus on pressure and temperature," The Journal of Supercritical Fluids, vol. 66, pp. 307–314, Jun. 2012.
S. A. Ahmed, T. Morén, M. Sehlstedt-Persson, and Å. Blom, "Effect of oil impregnation on water repellency, dimensional stability and mold susceptibility of thermally modified European aspen and downy birch wood," Journal of Wood Science, vol. 63, no. 1, pp. 74–82, Feb. 2017.
M. Tao, X. Liu, and W. Xu, "Effect of the Vacuum Impregnation Process on Water Absorption and Nail-Holding Power of Silica Sol-Modified Chinese Fir," Forests, vol. 15, no. 2, Feb. 2024, Art. no. 270.
H. Yang, M. Gao, J. Wang, H. Mu, and D. Qi, "Fast Preparation of High-Performance Wood Materials Assisted by Ultrasonic and Vacuum Impregnation," Forests, vol. 12, no. 5, May 2021, Art. no. 567.
A. Tarmian, I. Zahedi Tajrishi, R. Oladi, and D. Efhamisisi, "Treatability of wood for pressure treatment processes: a literature review," European Journal of Wood and Wood Products, vol. 78, no. 4, pp. 635–660, Jul. 2020.
Y. Dong, Y. Yan, S. Zhang, and J. Li, "Wood/polymer nanocomposites prepared by impregnation with furfuryl alcohol and nano-SiO2," BioResources, vol. 9, no. 4, pp. 6028–6040, 2014.
Downloads
How to Cite
License
Copyright (c) 2025 Nini H. Aswad, Siti Nurjanah Ahmad, Tryantini S. Putri, Satoto Endar Nayono, Tachrir, Miswar Tumpu
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.
